The Minoan Culture: Outdoor Fountains

During archaeological digs on the island of Crete, various sorts of conduits have been found. Along with delivering water, they distributed water that gathered from deluges or waste. They were typically constructed from terracotta or rock. Terracotta was used for channels and conduits, both rectangle-shaped and circular. There are two good examples of Minoan clay piping, those with a shortened cone shape and a U-shape that haven’t been caught in any civilization since. 53265ct__51863.jpg Clay conduits were utilized to distribute water at Knossos Palace, running up to three meters below the floors. The pipes also had other uses including gathering water and directing it to a central area for storing. In order to make this conceivable, the pipes had to be created to handle: Underground Water Transportation: This particular system’s unseen nature may suggest that it was originally manufactured for some kind of ritual or to allocate water to limited communities. Quality Water Transportation: Considering the evidence, several scholars advocate that these pipelines were not attached to the prevalent water allocation process, offering the residence with water from a different source.

The Countless Possibilities in Garden Wall Fountains

A small patio or a courtyard is a great place to situate your wall fountain when you need peace and quiet. Even a little space can include a custom-made one. Both the stand alone and fitted models must have a spout, a water basin, internal tubing, and a pump. You have many models to a lot to pick from whether you are searching for a traditional, contemporary, classical, or Asian style.

Also knownas a floor fountain, a stand-alone wall fountain is normally rather big, and its basin is placed on the ground.

On the other hand, a water feature attached to a wall can be added onto an existing wall or built into a new wall. Integrating this type of water feature into your landscape brings a cohesiveness to the look you want to achieve rather than making it seem as if the fountain was merely added later.

A Few Good Techniques to Install a Wall Water Feature

Enhance nearly any space with the addition of a wall fountain. The relaxing sound of the waterfall will relax and sooth. Foyers are common places for wall fountains, but they can also be hung in any common living area. Although the instructions for installing one are fairly straightforward there will be slight modifications depending on the model. Be sure that all the different pieces are used in assembling it. Once you connect the base and the top you will then need to connect the pump and the tubing. Be sure to review the instructions before starting to ensure it is done right. In general, it is quick and easy. Note, however, that the directions for your particular model can vary slightly. The easiest way to make sure it is positioned correctly is to recruit another person to hold it where you want it while you mark the wall.

To make sure it will be straight, get a level. It is recommended to mark both the bottom and the top positions. Your wall fountain can be hung using one of two methods. There are holes on the back which can be placed onto the screws you place on the wall. Another option is to mount it on brackets you have secured to the wall. This last one is the more advisable method, particularly if your fountain is large. Decide where the brackets will go and then mark the appropriate spot on the wall. Put pilot holes in the wall for the drywall anchors. Place the anchors in the wall using a hammer. The brackets can then be mounted on the wall utilizing a screwdriver or wireless drill. Then, lift your unit and hang it on the mounting brackets. Check to see that it is in the ideal position and secure on the brackets. Water can be added once the fountain has been mounted. There will need to be adequate water to cover the water pump.

Plug the pump into the wall and observe the water begin to move. Slowly add more water until it comes within an inch of the top of the basin. The basin will overflow when the pump is shut off if it is too full, so be careful not to fill it completely. When the pump is turned off the water all settles at the bottom of the basin, causing the water level to rise. The water will overflow and cause damage if your wall fountain is overly full.

Consider the Advantages of an Indoor Wall Water Feature

For many years now, hospitals and health care facilities have used interior fountains to establish a stress-free, serene environment. The calming effect of flowing water can be conducive to a meditative state.

The sounds produced by indoor fountains are also thought to increase the rate of recovery. Many physicians and mental health therapists think these are a helpful addition in treating a number of maladies. PTSD patients as well as those struggling with severe sleeping disorders are thought to feel better after hearing the calming, gentle trickle of water.

A number of reports show that having an indoor wall water feature can help you achieve a better sense of calm and overall safety. The sight and sound of water are elemental to the survival of human beings and our planet.

According to the ancient philosophy of feng-shui, water is thought to have life-altering powers and be one of the two basic components contributing to the continuation of our species. The central principle of feng-shui is that by harmonizing our interior environment we can attain peace and balance. The element of water should be included in every living space. The ideal spot to set up a fountain is near your home’s entrance or in front of it.

If you are looking for a water wall that best suits your families’ needs consider one of the many options available including a mounted waterfall, a stand-alone water feature or a custom-built fountain. Placing a fountain in a central room, according to some reports, seems to make people happier, more content, and relaxed than people who do not have one.

The Root of Modern Wall Fountains

During his rule (1397-1455) of the Roman Catholic Church, the erudite Pope Nicholas V commissioned countless of translations of ancient Greek classics into Latin. Continuing in his quest to make the city worthy of being called the seat of the Christian world, he resolved to embellish the beauty of the city as well.

Beginning in 1453, he called for the reconstruction of the Acqua Vergine, a decaying Roman aqueduct which had transported clean drinking water into the city from eight miles away. In addition, the ancient Roman tradition of marking the arrival point of an aqueduct with an grandiose celebratory fountain, also referred to as a mostra, was renewed by Nicholas V. At his behest, the architect Leon Battista Alberti began the building of a wall fountain in the place where the magnificent Trevi Fountain now stands. The aqueduct he had rebuilt included changes and extensions which eventually enabled it to supply the necessary water to the Trevi Fountain as well as the famed baroque fountains in the Piazza del Popolo and the Piazza Navona.

Outdoor Wall Fountains: The Many Designs on the Market

Small verandas or courtyards are an ideal place to install wall fountains since they add style to an area with limited space. The myriad of designs in outdoor wall fountains, including traditional, classic, contemporary, or Asian, means that you can find the one suitable to your wishes. If you are looking for a distinctive design, a customized one can be specially made to meet your specifications.

Mounted and stand-alone water features are obtainable on the market. Mounted wall fountains are little and self-contained versions which can be displayed on a wall. Fountains of this type need to be lightweight, therefore, they are usually made of resin (resembling stone) or fiberglass. Stand-alone fountains, often referred to as floor fountains, are of considerable size, have a basin situated on the ground and a smooth side which leans against a wall. Water features such as these are usually manufactured of cast stone and have no weight restrictions.

Custom-built fountains which can be integrated into a new or existing wall are often prescribed by landscaping designers. A professional mason is required to place the water basin against the wall and properly install all the plumbing inside or behind the wall.

The wall will need to have a spout or fountain mask incorporated into it. A custom-built wall fountain blends into the landscape instead of standing out because it was a later addition, which contributes to a cohesive look.


Guidelines for Putting in a Wall Water Fountain
Slowly add just enough water to reach one inch below the top edge of the basin. The basin will overflow when the pump is shut off if it is too full, so be sure not to fill... read more